Flexible Filament 1.75mm 1kg

Flexible Filament 1.75mm is intended for use in some FDM 3D Printers. All of our filaments are air tight sealed with a moisture absorber and stored in darkness to reduce any degridation of the quality of the plastic.

Specifications
- Printing Temp: 240-260C - Ideal: 250C @ 30mm/s for most desktop 3D Printers/Prints
- Bed prep: Blue tape and glue stick. Want bed to be hot to allow flex to stick well and not shrink.
- Colours: Snow white, Nature, Green, Yellow, Blue, Red
- Net weight: 1000g + spool

Our Flexible is suitable for 3D Printers like, Makerbot, Flashforge, CTC, Ultimaker, RepRap ect.

Printing in Flex needs to be done slowly and with a spring loaded extruder only to allow constant pressure on the filament

The spool has a 160mm diameter and 95mm width which also makes it suitable for most 3D Printers
NOTE: Flex is much more dense than ABS which the spools were designed for, which is why it's not 'full'

To learn more about MADMAT 3D Printing and our Flexible filament click HERE